naibrd_sd_pib.h

Go to the documentation of this file.

 
typedef uint32_t nai_sd_interrupt_type_t;
enum nai_sd_interrupt_type
{
   NAI_SD_BIT_INT_TRIG_TYPE,
   NAI_SD_SIG_LOSS_INT_TRIG_TYPE,
   NAI_SD_REF_LOSS_INT_TRIG_TYPE,
   NAI_SD_2SPD_LOCK_LOSS_INT_TRIG_TYPE,
   NAI_SD_ANGLE_DELTA_LOSS_INT_TRIG_TYPE,
   NAI_SD_INTERRUPT_TYPE_ENUM_COUNT
};
enum nai_sd_interrupt_type
{
   NAI_SD_BIT_INT_TRIG_TYPE,
   NAI_SD_SIG_LOSS_INT_TRIG_TYPE,
   NAI_SD_REF_LOSS_INT_TRIG_TYPE,
   NAI_SD_2SPD_LOCK_LOSS_INT_TRIG_TYPE,
   NAI_SD_ANGLE_DELTA_LOSS_INT_TRIG_TYPE,
   NAI_SD_INTERRUPT_TYPE_ENUM_COUNT
};
typedef uint32_t nai_sd_status_type_t;
enum nai_sd_status_type
{
   NAI_SD_STATUS_BIT_LATCHED,
   NAI_SD_STATUS_BIT_REALTIME,
   NAI_SD_STATUS_SIGNAL_LATCHED,
   NAI_SD_STATUS_SIGNAL_REALTIME,
   NAI_SD_STATUS_REF_LATCHED,
   NAI_SD_STATUS_REF_REALTIME,
   NAI_SD_STATUS_2SPDLOCKLOSS_LATCHED,
   NAI_SD_STATUS_2SPDLOCKLOSS_REALTIME,
   NAI_SD_STATUS_ANGLEDELTA_LATCHED,
   NAI_SD_STATUS_ANGLEDELTA_REALTIME,
   NAI_SD_STATUS_TYPE_ENUM_COUNT
};
enum nai_sd_status_type
{
   NAI_SD_STATUS_BIT_LATCHED,
   NAI_SD_STATUS_BIT_REALTIME,
   NAI_SD_STATUS_SIGNAL_LATCHED,
   NAI_SD_STATUS_SIGNAL_REALTIME,
   NAI_SD_STATUS_REF_LATCHED,
   NAI_SD_STATUS_REF_REALTIME,
   NAI_SD_STATUS_2SPDLOCKLOSS_LATCHED,
   NAI_SD_STATUS_2SPDLOCKLOSS_REALTIME,
   NAI_SD_STATUS_ANGLEDELTA_LATCHED,
   NAI_SD_STATUS_ANGLEDELTA_REALTIME,
   NAI_SD_STATUS_TYPE_ENUM_COUNT
};
typedef uint32_t nai_sd_raw_t;
enum nai_sd_raw
{
   NAI_SD_RAW_ACTIVE_CHANNEL,
   NAI_SD_RAW_LATCH,
   NAI_SD_RAW_TEST_ENABLE,
   NAI_SD_RAW_TEST_ANGLE,
   NAI_SD_ONBOARD_REF_FREQ,
   NAI_SD_ONBOARD_REF_VOLT,
   NAI_SD_RAW_ENUM_COUNT
};
enum nai_sd_raw
{
   NAI_SD_RAW_ACTIVE_CHANNEL,
   NAI_SD_RAW_LATCH,
   NAI_SD_RAW_TEST_ENABLE,
   NAI_SD_RAW_TEST_ANGLE,
   NAI_SD_ONBOARD_REF_FREQ,
   NAI_SD_ONBOARD_REF_VOLT,
   NAI_SD_RAW_ENUM_COUNT
};
typedef uint32_t nai_sd_channel_raw_t;
enum nai_sd_channel_raw
{
   NAI_SD_CHAN_RAW_ANGLE,                /* Read-only */
   NAI_SD_CHAN_RAW_ANGLE_COMBINED,
   NAI_SD_CHAN_RAW_VELOCITY,             /* Read-only */
   NAI_SD_CHAN_RAW_BANDWIDTH,
   NAI_SD_CHAN_RAW_ANGLE_DELTA,
   NAI_SD_CHAN_RAW_FREQUENCY,            /* Read-only */
   NAI_SD_CHAN_RAW_SIGNAL_VOLTAGE,       /* Read-only */
   NAI_SD_CHAN_RAW_REF_VOLTAGE,          /* Read-only */
   NAI_SD_CHAN_RAW_SIG_LOSS_THRESHOLD,
   NAI_SD_CHAN_RAW_REF_LOSS_THRESHOLD,
   NAI_SD_CHAN_RAW_ENC_COMM,
   NAI_SD_CHAN_RAW_ENUM_COUNT
};
enum nai_sd_channel_raw
{
   NAI_SD_CHAN_RAW_ANGLE,                /* Read-only */
   NAI_SD_CHAN_RAW_ANGLE_COMBINED,
   NAI_SD_CHAN_RAW_VELOCITY,             /* Read-only */
   NAI_SD_CHAN_RAW_BANDWIDTH,
   NAI_SD_CHAN_RAW_ANGLE_DELTA,
   NAI_SD_CHAN_RAW_FREQUENCY,            /* Read-only */
   NAI_SD_CHAN_RAW_SIGNAL_VOLTAGE,       /* Read-only */
   NAI_SD_CHAN_RAW_REF_VOLTAGE,          /* Read-only */
   NAI_SD_CHAN_RAW_SIG_LOSS_THRESHOLD,
   NAI_SD_CHAN_RAW_REF_LOSS_THRESHOLD,
   NAI_SD_CHAN_RAW_ENC_COMM,
   NAI_SD_CHAN_RAW_ENUM_COUNT
};
#else
typedef uint32_t nai_sd_powersupply_type_t;
enum nai_sd_powersupply_type
{
   NAI_SD_POWERSUPPLY_14V,  //NAI_SD_POWERSUPPLY_POS3_3,
   NAI_SD_POWERSUPPLY_5V,   //NAI_SD_POWERSUPPLY_NEG5_0,
   NAI_SD_POWERSUPPLY_GND,  //NAI_SD_POWERSUPPLY_POS15,
   NAI_SD_POWERSUPPLY_3P3V, //NAI_SD_POWERSUPPLY_NEG15,
   NAI_SD_POWERSUPPLY_7VAC, //NAI_SD_POWERSUPPLY_POS5,
   NAI_SD_POWERSUPPLY_TYPE_ENUM_COUNT
};
enum nai_sd_powersupply_type
{
   NAI_SD_POWERSUPPLY_14V,  //NAI_SD_POWERSUPPLY_POS3_3,
   NAI_SD_POWERSUPPLY_5V,   //NAI_SD_POWERSUPPLY_NEG5_0,
   NAI_SD_POWERSUPPLY_GND,  //NAI_SD_POWERSUPPLY_POS15,
   NAI_SD_POWERSUPPLY_3P3V, //NAI_SD_POWERSUPPLY_NEG15,
   NAI_SD_POWERSUPPLY_7VAC, //NAI_SD_POWERSUPPLY_POS5,
   NAI_SD_POWERSUPPLY_TYPE_ENUM_COUNT
};