naibrd_ad.h

Go to the documentation of this file.

enum nai_ad_raw
{
   NAI_AD_RAW_CLK_RATE_ADDER_LO,
   NAI_AD_RAW_CLK_RATE_ADDER_HI,
   NAI_AD_RAW_TEST_ENABLE,
   NAI_AD_RAW_D0_RANGE_POLARITY,
   NAI_AD_RAW_D0_TEST_VALUE,
   NAI_AD_RAW_MODE,
   NAI_AD_RAW_ACTIVE_CHANNELS,
   NAI_AD_RAW_BIT_INTRPT_ENABLE,
   NAI_AD_RAW_OPEN_INTRPT_ENABLE,
   NAI_AD_RAW_OVER_CURRENT_INTRPT_ENABLE,
   NAI_AD_RAW_POWER_ENABLE,
   NAI_AD_RAW_THRESHOLD_INTRPT_ENABLE,
   NAI_AD_RAW_THRESHOLD_CONTROL, /* Threshold Ver2 and beyond. */
   NAI_AD_RAW_FAF_INTRPT_ENABLE,
   NAI_AD_RAW_SATURATION_INTRPT_ENABLE,
   NAI_AD_RAW_INTER_FPGA_FAULT_INTRPT_ENABLE,
   NAI_AD_RAW_ENUM_COUNT
};
typedef uint32_t nai_ad_raw_t;
enum nai_ad_channel_raw
{
   NAI_AD_CHAN_RAW_RANGE,
   NAI_AD_CHAN_RAW_DATA,
   NAI_AD_CHAN_BREAK_FREQ,
   NAI_AD_CHAN_THRESHOLD1,
   NAI_AD_CHAN_THRESHOLD_CONTROL1,     /* Threshold Ver1 only. */
   NAI_AD_CHAN_THRESHOLD2,
   NAI_AD_CHAN_THRESHOLD_CONTROL2,     /* Threshold Ver1 only. */
   NAI_AD_CHAN_THRESHOLD_HYSTERESIS1,  /* Threshold Ver2 and beyond. */
   NAI_AD_CHAN_THRESHOLD_HYSTERESIS2,  /* Threshold Ver2 and beyond. */
   NAI_AD_CHAN_SATURATION_LOW,
   NAI_AD_CHAN_SATURATION_HIGH,
   NAI_AD_CHAN_RAW_RMS,
   NAI_AD_CHAN_RAW_ENUM_COUNT
};
typedef uint32_t nai_ad_channel_raw_t;
enum nai_ad_status_type
{
   NAI_AD_STATUS_BIT_LATCHED,
   NAI_AD_STATUS_BIT_REALTIME,
   NAI_AD_STATUS_OPEN_LATCHED,
   NAI_AD_STATUS_OPEN_OVERVOLT_LATCHED = NAI_AD_STATUS_OPEN_LATCHED,
   NAI_AD_STATUS_OPEN_REALTIME,
   NAI_AD_STATUS_OPEN_OVERVOLT_REALTIME = NAI_AD_STATUS_OPEN_REALTIME,
   NAI_AD_STATUS_OVERCURRENT_LATCHED,
   NAI_AD_STATUS_OVERCURRENT_REALTIME,
   NAI_AD_STATUS_THRESHOLD1_LATCHED,
   NAI_AD_STATUS_THRESHOLD1_REALTIME,
   NAI_AD_STATUS_THRESHOLD2_LATCHED,
   NAI_AD_STATUS_THRESHOLD2_REALTIME,
   NAI_AD_STATUS_FAF_LATCHED,
   NAI_AD_STATUS_FAF_REALTIME,
   NAI_AD_STATUS_SATURATION_LOW_LATCHED,
   NAI_AD_STATUS_SATURATION_LOW_REALTIME,
   NAI_AD_STATUS_SATURATION_HIGH_LATCHED,
   NAI_AD_STATUS_SATURATION_HIGH_REALTIME,
   NAI_AD_STATUS_INTER_FPGA_FAULT_LATCHED,
   NAI_AD_STATUS_INTER_FPGA_FAULT_REALTIME,
   NAI_AD_STATUS_SUMMARY_LATCHED,
   NAI_AD_STATUS_SUMMARY_REALTIME,
   NAI_AD_STATUS_EXTERNAL_POWER_LOSS_12V_POSITIVE_LATCHED,
   NAI_AD_STATUS_EXTERNAL_POWER_LOSS_12V_POSITIVE_REALTIME,
   NAI_AD_STATUS_EXTERNAL_POWER_LOSS_12V_NEGATIVE_LATCHED,
   NAI_AD_STATUS_EXTERNAL_POWER_LOSS_12V_NEGATIVE_REALTIME,
   NAI_AD_STATUS_TYPE_ENUM_COUNT
};
typedef uint32_t nai_ad_status_type_t;
enum nai_ad_reset_type
{
   NAI_AD_RESET_OVERCURRENT,
   NAI_AD_RESET_TYPE_ENUM_COUNT
};
typedef int32_t nai_ad_reset_type_t;
enum nai_ad_test_type
{
   NAI_AD_D0_TEST,
   NAI_AD_D2_TEST,
   NAI_AD_D3_TEST,
   NAI_AD_TEST_TYPE_ENUM_COUNT
};
typedef uint32_t nai_ad_test_type_t;
enum nai_ad_fifo_status_type
{
   NAI_AD_FIFO_STATUS_LATCHED,
   NAI_AD_FIFO_STATUS_REALTIME
};
typedef uint32_t nai_ad_fifo_status_type_t;
enum nai_ad_threshold_detect_id_type
{
   NAI_AD_THRESHOLD_DETECT_ID1,
   NAI_AD_THRESHOLD_DETECT_ID2
};
typedef uint32_t nai_ad_threshold_detect_id_type_t;
enum nai_ad_saturation_control_type
{
   NAI_AD_SATURATION_CONTROL_LOW  = 0x00000001,
   NAI_AD_SATURATION_CONTROL_HIGH = 0x00000002
};
typedef uint32_t nai_ad_saturation_control_type_t;
enum nai_ad_cal_type
{
   NAI_AD_CALCHAN,
   NAI_AD_PROBE2,
   NAI_AD_PROBE3,
   NAI_AD_CAL_RANGE,
   NAI_AD_CAL_RESULT_LOW_VALUE,
   NAI_AD_CAL_RESULT_HI_VALUE,
   NAI_AD_CALSTATE,
   NAI_AD_CAL_ENUM_COUNT
};
typedef uint32_t nai_ad_cal_type_t;