Software Library API naibrd 1.62
See all documentation at naii.docs.com
Functions
Pattern Generator Functions
DIF Module Functions

Functions

NAIBRDFUNC nai_status_t NAIAPI naibrd_DIF_SetPatternGenStartAddr (int32_t cardIndex, int32_t module, uint32_t startAddr)
 Sets the starting address to look at for RAM Pattern Generator.
 
NAIBRDFUNC nai_status_t NAIAPI naibrd_DIF_GetPatternGenStartAddr (int32_t cardIndex, int32_t module, uint32_t *outstartAddr)
 Gets the starting address to look at for RAM Pattern Generator.
 
NAIBRDFUNC nai_status_t NAIAPI naibrd_DIF_SetPatternGenEndAddr (int32_t cardIndex, int32_t module, uint32_t EndAddr)
 Sets the Ending address to look at for RAM Pattern Generator.
 
NAIBRDFUNC nai_status_t NAIAPI naibrd_DIF_GetPatternGenEndAddr (int32_t cardIndex, int32_t module, uint32_t *outEndAddr)
 Gets the Ending address to look at for RAM Pattern Generator.
 
NAIBRDFUNC nai_status_t NAIAPI naibrd_DIF_SetPatternGenPeriod (int32_t cardIndex, int32_t module, float64_t period_mS)
 Sets the period for the Pattern Generator for the specified Discrete channel.
 
NAIBRDFUNC nai_status_t NAIAPI naibrd_DIF_GetPatternGenPeriod (int32_t cardIndex, int32_t module, float64_t *outperiod_mS)
 Retrieves the period for the Pattern Generator for the specified Discrete channel.
 
NAIBRDFUNC nai_status_t NAIAPI naibrd_DIF_SetPatternGen_BurstNum (int32_t cardIndex, int32_t module, uint32_t burstNum)
 Sets the number of cycles to output in the PatternGen burst mode for the specified Discrete module. The set value is applicable for enhanced IO PatternGen burst mode.
 
NAIBRDFUNC nai_status_t NAIAPI naibrd_DIF_GetPatternGen_BurstNum (int32_t cardIndex, int32_t module, uint32_t *outburstNum)
 Retrieves the number of cycles set to output in the PatternGen burst mode for the specified Discrete module.
 
NAIBRDFUNC nai_status_t NAIAPI naibrd_DIF_SetPatternGenCtrl (int32_t cardIndex, int32_t module, nai_dif_pattern_ctrl_t controlBit, nai_dif_enable_t state)
 Sets the state for the RAM Pattern Generator for the selected control bit on the module. Options are enable and disable.
 
NAIBRDFUNC nai_status_t NAIAPI naibrd_DIF_GetPatternGenCtrl (int32_t cardIndex, int32_t module, nai_dif_pattern_ctrl_t controlBit, nai_dif_enable_t *outstate)
 Gets the state for the RAM Pattern Generator for the selected control bit on the module. Options are enable and disable.
 
NAIBRDFUNC nai_status_t NAIAPI naibrd_DIF_SetPatternGenBuf (int32_t cardIndex, int32_t module, int32_t dataPatternLen, uint32_t *dataPattern)
 Sets the pattern for RAM Pattern Generator.
 
NAIBRDFUNC nai_status_t NAIAPI naibrd_DIF_GetPatternGenBuf (int32_t cardIndex, int32_t module, int32_t dataPatternLen, uint32_t *dataPattern)
 Retrieves the pattern for RAM Pattern Generator.
 
NAIBRDFUNC nai_status_t NAIAPI naibrd_DIF_SetPatternGenCtrlRaw (int32_t cardIndex, int32_t module, uint32_t controlRaw)
 Sets the control bits for RAM Pattern Generator.
 
NAIBRDFUNC nai_status_t NAIAPI naibrd_DIF_GetPatternGenCtrlRaw (int32_t cardIndex, int32_t module, uint32_t *outcontrolRaw)
 Retrieves the control bits for RAM Pattern Generator.
 

Detailed Description


Function Documentation

◆ naibrd_DIF_GetPatternGen_BurstNum()

NAIBRDFUNC nai_status_t NAIAPI naibrd_DIF_GetPatternGen_BurstNum ( int32_t cardIndex,
int32_t module,
uint32_t * outburstNum )

Retrieves the number of cycles set to output in the PatternGen burst mode for the specified Discrete module.

Parameters
cardIndex: (Input) Logical Card Index assigned to connection with the NAI_BOARD (0 - NAI_MAX_CARDS-1).
module: (Input) Module Number of the module to access (1 - [max modules for board]).
outburstNum: (Output)Number of cycles to output upon trigger, in PatternGen burst mode.
Returns
  • NAI_SUCCESS
  • NAI_ERROR_INVALID_CARD when invalid card parameter is specified.
  • NAI_ERROR_INVALID_MODULE when invalid card parameter is specified.
  • NAI_ERROR_NOT_OPEN when handle to board is invalid.
  • NAI_ERROR_INVALID_VALUE when invalid format type parameter is specified.
  • NAI_ERROR_NOT_SUPPORTED when function is not supported.

◆ naibrd_DIF_GetPatternGenBuf()

NAIBRDFUNC nai_status_t NAIAPI naibrd_DIF_GetPatternGenBuf ( int32_t cardIndex,
int32_t module,
int32_t dataPatternLen,
uint32_t * dataPattern )

Retrieves the pattern for RAM Pattern Generator.

Parameters
cardIndex: (Input) Logical Card Index assigned to connection with the NAI_BOARD (0 - NAI_MAX_CARDS-1).
module: (Input) Module Number of the module to access (1 - [max modules for board]).
dataPatternLen: (Input) Length of buffer holding RAM Pattern .
dataPattern: (Input) Buffer holding RAM Pattern .
Returns
  • NAI_SUCCESS
  • NAI_ERROR_INVALID_CARD when invalid card parameter is specified.
  • NAI_ERROR_INVALID_MODULE when invalid card parameter is specified.
  • NAI_ERROR_NOT_OPEN when handle to board is invalid.
  • NAI_ERROR_INVALID_CHANNEL when invalid channel parameter.
  • NAI_ERROR_INVALID_VALUE when invalid format type parameter is specified.
  • NAI_ERROR_NOT_SUPPORTED when function is not supported.

◆ naibrd_DIF_GetPatternGenCtrl()

NAIBRDFUNC nai_status_t NAIAPI naibrd_DIF_GetPatternGenCtrl ( int32_t cardIndex,
int32_t module,
nai_dif_pattern_ctrl_t controlBit,
nai_dif_enable_t * outstate )

Gets the state for the RAM Pattern Generator for the selected control bit on the module. Options are enable and disable.

Parameters
cardIndex: (Input) Logical Card Index assigned to connection with the NAI_BOARD (0 - NAI_MAX_CARDS-1).
module: (Input) Module Number of the module to access (1 - [max modules for board]).
controlBit: (Input) Bit Type: refer to nai_dif_pattern_ctrl_t definition.
outstate: (Input) Enable/Disable: refer to nai_dif_enable_t.
Returns
  • NAI_SUCCESS
  • NAI_ERROR_INVALID_CARD when invalid card parameter is specified.
  • NAI_ERROR_INVALID_MODULE when invalid card parameter is specified.
  • NAI_ERROR_NOT_OPEN when handle to board is invalid.
  • NAI_ERROR_NOT_SUPPORTED when function is not supported.

◆ naibrd_DIF_GetPatternGenCtrlRaw()

NAIBRDFUNC nai_status_t NAIAPI naibrd_DIF_GetPatternGenCtrlRaw ( int32_t cardIndex,
int32_t module,
uint32_t * outcontrolRaw )

Retrieves the control bits for RAM Pattern Generator.

Parameters
cardIndex: (Input) Logical Card Index assigned to connection with the NAI_BOARD (0 - NAI_MAX_CARDS-1).
module: (Input) Module Number of the module to access (1 - [max modules for board]).
outcontrolRaw: (Output) RAM Pattern control bits .
Returns
  • NAI_SUCCESS
  • NAI_ERROR_INVALID_CARD when invalid card parameter is specified.
  • NAI_ERROR_INVALID_MODULE when invalid card parameter is specified.
  • NAI_ERROR_NOT_OPEN when handle to board is invalid.
  • NAI_ERROR_INVALID_CHANNEL when invalid channel parameter.
  • NAI_ERROR_INVALID_VALUE when invalid format type parameter is specified.
  • NAI_ERROR_NOT_SUPPORTED when function is not supported.

◆ naibrd_DIF_GetPatternGenEndAddr()

NAIBRDFUNC nai_status_t NAIAPI naibrd_DIF_GetPatternGenEndAddr ( int32_t cardIndex,
int32_t module,
uint32_t * outEndAddr )

Gets the Ending address to look at for RAM Pattern Generator.

Parameters
cardIndex: (Input) Logical Card Index assigned to connection with the NAI_BOARD (0 - NAI_MAX_CARDS-1).
module: (Input) Module Number of the module to access (1 - [max modules for board]).
outEndAddr: (Output) Ending Address to output RAM pattern generator data from.
Returns
  • NAI_SUCCESS
  • NAI_ERROR_INVALID_CARD when invalid card parameter is specified.
  • NAI_ERROR_INVALID_MODULE when invalid card parameter is specified.
  • NAI_ERROR_NOT_OPEN when handle to board is invalid.
  • NAI_ERROR_INVALID_CHANNEL when invalid channel parameter.
  • NAI_ERROR_INVALID_VALUE when invalid format type parameter is specified.
  • NAI_ERROR_INVALID_RANGE when invalid range address parameter is specified.
  • NAI_ERROR_NOT_SUPPORTED when function is not supported.

◆ naibrd_DIF_GetPatternGenPeriod()

NAIBRDFUNC nai_status_t NAIAPI naibrd_DIF_GetPatternGenPeriod ( int32_t cardIndex,
int32_t module,
float64_t * outperiod_mS )

Retrieves the period for the Pattern Generator for the specified Discrete channel.

Parameters
cardIndex: (Input) Logical Card Index assigned to connection with the NAI_BOARD (0 - NAI_MAX_CARDS-1).
module: (Input) Module Number of the module to access (1 - [max modules for board]).
outperiod_mS: (Output) Period in milliseconds valid from .000008mS to 34360mS .
Returns
  • NAI_SUCCESS
  • NAI_ERROR_INVALID_CARD when invalid card parameter is specified.
  • NAI_ERROR_INVALID_MODULE when invalid card parameter is specified.
  • NAI_ERROR_NOT_OPEN when handle to board is invalid.
  • NAI_ERROR_INVALID_CHANNEL when invalid channel parameter.
  • NAI_ERROR_INVALID_VALUE when invalid format type parameter is specified.
  • NAI_ERROR_NOT_SUPPORTED when function is not supported.

◆ naibrd_DIF_GetPatternGenStartAddr()

NAIBRDFUNC nai_status_t NAIAPI naibrd_DIF_GetPatternGenStartAddr ( int32_t cardIndex,
int32_t module,
uint32_t * outstartAddr )

Gets the starting address to look at for RAM Pattern Generator.

Parameters
cardIndex: (Input) Logical Card Index assigned to connection with the NAI_BOARD (0 - NAI_MAX_CARDS-1).
module: (Input) Module Number of the module to access (1 - [max modules for board]).
outstartAddr: (Output) Starting Address to output RAM pattern generator data from.
Returns
  • NAI_SUCCESS
  • NAI_ERROR_INVALID_CARD when invalid card parameter is specified.
  • NAI_ERROR_INVALID_MODULE when invalid card parameter is specified.
  • NAI_ERROR_NOT_OPEN when handle to board is invalid.
  • NAI_ERROR_INVALID_CHANNEL when invalid channel parameter.
  • NAI_ERROR_INVALID_VALUE when invalid format type parameter is specified.
  • NAI_ERROR_INVALID_RANGE when invalid range address parameter is specified.
  • NAI_ERROR_NOT_SUPPORTED when function is not supported.

◆ naibrd_DIF_SetPatternGen_BurstNum()

NAIBRDFUNC nai_status_t NAIAPI naibrd_DIF_SetPatternGen_BurstNum ( int32_t cardIndex,
int32_t module,
uint32_t burstNum )

Sets the number of cycles to output in the PatternGen burst mode for the specified Discrete module. The set value is applicable for enhanced IO PatternGen burst mode.

Parameters
cardIndex: (Input) Logical Card Index assigned to connection with the NAI_BOARD (0 - NAI_MAX_CARDS-1).
module: (Input) Module Number of the module to access (1 - [max modules for board]).
burstNum: (Input)Number of cycles to output upon trigger, in PatternGen burst mode.
Returns
  • NAI_SUCCESS
  • NAI_ERROR_INVALID_CARD when invalid card parameter is specified.
  • NAI_ERROR_INVALID_MODULE when invalid card parameter is specified.
  • NAI_ERROR_NOT_OPEN when handle to board is invalid.
  • NAI_ERROR_INVALID_VALUE when invalid format type parameter is specified.
  • NAI_ERROR_NOT_SUPPORTED when function is not supported.

◆ naibrd_DIF_SetPatternGenBuf()

NAIBRDFUNC nai_status_t NAIAPI naibrd_DIF_SetPatternGenBuf ( int32_t cardIndex,
int32_t module,
int32_t dataPatternLen,
uint32_t * dataPattern )

Sets the pattern for RAM Pattern Generator.

Parameters
cardIndex: (Input) Logical Card Index assigned to connection with the NAI_BOARD (0 - NAI_MAX_CARDS-1).
module: (Input) Module Number of the module to access (1 - [max modules for board]).
dataPatternLen: (Input) Length of buffer holding RAM Pattern .
dataPattern: (Input) Buffer holding RAM Pattern .
Returns
  • NAI_SUCCESS
  • NAI_ERROR_INVALID_CARD when invalid card parameter is specified.
  • NAI_ERROR_INVALID_MODULE when invalid card parameter is specified.
  • NAI_ERROR_NOT_OPEN when handle to board is invalid.
  • NAI_ERROR_INVALID_CHANNEL when invalid channel parameter.
  • NAI_ERROR_INVALID_VALUE when invalid format type parameter is specified.
  • NAI_ERROR_NOT_SUPPORTED when function is not supported.

◆ naibrd_DIF_SetPatternGenCtrl()

NAIBRDFUNC nai_status_t NAIAPI naibrd_DIF_SetPatternGenCtrl ( int32_t cardIndex,
int32_t module,
nai_dif_pattern_ctrl_t controlBit,
nai_dif_enable_t state )

Sets the state for the RAM Pattern Generator for the selected control bit on the module. Options are enable and disable.

Parameters
cardIndex: (Input) Logical Card Index assigned to connection with the NAI_BOARD (0 - NAI_MAX_CARDS-1).
module: (Input) Module Number of the module to access (1 - [max modules for board]).
controlBit: (Input) Bit Type: refer to nai_dif_pattern_ctrl_t definition.
state: (Input) Enable/Disable: refer to nai_dif_enable_t.
Returns
  • NAI_SUCCESS
  • NAI_ERROR_INVALID_CARD when invalid card parameter is specified.
  • NAI_ERROR_INVALID_MODULE when invalid card parameter is specified.
  • NAI_ERROR_NOT_OPEN when handle to board is invalid.
  • NAI_ERROR_NOT_SUPPORTED when function is not supported.

◆ naibrd_DIF_SetPatternGenCtrlRaw()

NAIBRDFUNC nai_status_t NAIAPI naibrd_DIF_SetPatternGenCtrlRaw ( int32_t cardIndex,
int32_t module,
uint32_t controlRaw )

Sets the control bits for RAM Pattern Generator.

Parameters
cardIndex: (Input) Logical Card Index assigned to connection with the NAI_BOARD (0 - NAI_MAX_CARDS-1).
module: (Input) Module Number of the module to access (1 - [max modules for board]).
controlRaw: (Input) RAM Pattern Control bits.
Returns
  • NAI_SUCCESS
  • NAI_ERROR_INVALID_CARD when invalid card parameter is specified.
  • NAI_ERROR_INVALID_MODULE when invalid card parameter is specified.
  • NAI_ERROR_NOT_OPEN when handle to board is invalid.
  • NAI_ERROR_INVALID_CHANNEL when invalid channel parameter.
  • NAI_ERROR_INVALID_VALUE when invalid format type parameter is specified.
  • NAI_ERROR_NOT_SUPPORTED when function is not supported.

◆ naibrd_DIF_SetPatternGenEndAddr()

NAIBRDFUNC nai_status_t NAIAPI naibrd_DIF_SetPatternGenEndAddr ( int32_t cardIndex,
int32_t module,
uint32_t EndAddr )

Sets the Ending address to look at for RAM Pattern Generator.

Parameters
cardIndex: (Input) Logical Card Index assigned to connection with the NAI_BOARD (0 - NAI_MAX_CARDS-1).
module: (Input) Module Number of the module to access (1 - [max modules for board]).
EndAddr: (Input) Ending Address to output RAM pattern generator data from.
Returns
  • NAI_SUCCESS
  • NAI_ERROR_INVALID_CARD when invalid card parameter is specified.
  • NAI_ERROR_INVALID_MODULE when invalid card parameter is specified.
  • NAI_ERROR_NOT_OPEN when handle to board is invalid.
  • NAI_ERROR_INVALID_CHANNEL when invalid channel parameter.
  • NAI_ERROR_INVALID_VALUE when invalid format type parameter is specified.
  • NAI_ERROR_INVALID_RANGE when invalid range address parameter is specified.
  • NAI_ERROR_NOT_SUPPORTED when function is not supported.

◆ naibrd_DIF_SetPatternGenPeriod()

NAIBRDFUNC nai_status_t NAIAPI naibrd_DIF_SetPatternGenPeriod ( int32_t cardIndex,
int32_t module,
float64_t period_mS )

Sets the period for the Pattern Generator for the specified Discrete channel.

Parameters
cardIndex: (Input) Logical Card Index assigned to connection with the NAI_BOARD (0 - NAI_MAX_CARDS-1).
module: (Input) Module Number of the module to access (1 - [max modules for board]).
period_mS: (Input) Period in milliseconds valid from .000008mS to 34360mS .
Returns
  • NAI_SUCCESS
  • NAI_ERROR_INVALID_CARD when invalid card parameter is specified.
  • NAI_ERROR_INVALID_MODULE when invalid card parameter is specified.
  • NAI_ERROR_NOT_OPEN when handle to board is invalid.
  • NAI_ERROR_INVALID_CHANNEL when invalid channel parameter.
  • NAI_ERROR_INVALID_VALUE when invalid format type parameter is specified.
  • NAI_ERROR_NOT_SUPPORTED when function is not supported.

◆ naibrd_DIF_SetPatternGenStartAddr()

NAIBRDFUNC nai_status_t NAIAPI naibrd_DIF_SetPatternGenStartAddr ( int32_t cardIndex,
int32_t module,
uint32_t startAddr )

Sets the starting address to look at for RAM Pattern Generator.

Parameters
cardIndex: (Input) Logical Card Index assigned to connection with the NAI_BOARD (0 - NAI_MAX_CARDS-1).
module: (Input) Module Number of the module to access (1 - [max modules for board]).
startAddr: (Input) Starting Address to output RAM pattern generator data from.
Returns
  • NAI_SUCCESS
  • NAI_ERROR_INVALID_CARD when invalid card parameter is specified.
  • NAI_ERROR_INVALID_MODULE when invalid card parameter is specified.
  • NAI_ERROR_NOT_OPEN when handle to board is invalid.
  • NAI_ERROR_INVALID_CHANNEL when invalid channel parameter.
  • NAI_ERROR_INVALID_VALUE when invalid format type parameter is specified.
  • NAI_ERROR_INVALID_RANGE when invalid range address parameter is specified.
  • NAI_ERROR_NOT_SUPPORTED when function is not supported.